Bosch Motion Detector User Manual

3x KRAK!
3x KRAK!
34 35
6.5 Wall fixing with screws
Punch through the three pre-punched
screw holes in the Motion Detector’s
mounting bracket.
Hold the mounting bracket against the
desired position on the wall and mark
the drill holes.
Fix the Motion Detector using
screws and plugs.
When choosing a fixing
location and when
drilling, pay attention to
potential electrical lines
and/or supply lines that
could be behind the wall.

Bosch Motion Detector Specifications

General

Technology	Passive Infrared (PIR)
Tamper Protection	Yes
Detection Range	12 meters
Wireless Communication	RF
Operating Temperature	-10°C to +55°C (14°F to 131°F)
Power Source	Battery or wired