Getting Started
English 8
Indicators and Other Features Beep - Signals that more information must be entered or confirms the receipt of
an entry. A Beep also signals the end of a program or an oven error.
End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive
beeps will sound.
Default Settings - The cooking modes automatically select the default tempera-
ture. These can be changed when a different one is needed.
Flashing Symbol or Number - Signals an incomplete setting and calls for
another step or START to be pressed.
F Number Codes -These codes display when there is a problem with the range.
Convection Fan The convection fan operates during any convection mode. When the oven is oper-
ating in the convection mode, the fan will turn off automatically when the door is
opened. The convection fan does run during self-clean, although not at the begin-
ning of the mode.
Note: On some models, the convection fan also runs during preheat for the bake
mode.
Control (Panel)
Oven Control Panel
Figure 5: Oven Control Panel
Cooking Mode
Temperature
Start
Light
Time
Off
Cooking
Mode Indicator
Preheat Temperature
Lock Indicator
Clock
Oven Temperature
Control Knob
AM
PM
To Next Page
Loading...
