EasyManua.ls Logo

Bosch GBH 2 S - Technical Data; Product Elements

Bosch GBH 2 S
20 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Technical data
Product elements
1 Dust cap
2 Locking sleeve
3 Cooling vent
4 Bit stop
5 Auxiliary handle
6 Release button
7 Mode selector switch
8 On/Off switch
9 Interlock
Not all the accessories illustrated or described are
included in standard delivery.
Noise/vibration information
Measured values determined according to EN
50144-1(1998).
Typically the A-weighted noise levels of the tool
are: Sound pressure level: 88 dB (A); Sound
power level: 101 dB (A).
Wear ear protection!
The typical weighted acceleration is 11 m/s
2
.
Inteded use
The machine is intended for hammer drilling in con-
crete, brick and stone. It is also suitable for drilling
without impact in wood, metal, ceramic and plastic.
GBH 2-24S - This machine is as well as for the
chiselling of plaster and other light chiselling work.
For your safety
Working safely with this machine
is possible only when the operat-
ing and safety information are read
completely and the instructions
contained therein are strictly followed. In ad-
dition, the general safety notes on page 18
must be observed. Before using for the first
time, ask for a practical demonstration.
The machine must not be damp and
must also not be operated in damp sur-
roundings.
If the cable is damaged or cut through
while working, do not touch the cable but
immediately pull the mains plug. Never
use the machine with a damaged cable.
Always wear goggles, protective gloves
and robust shoes when using the ap-
pliance.
Wear ear protection to prevent damage
to your hearing.
Only connect the power plug when the tool
is Off.
Disconnect the power plug after use.
Model GBH 2-S GBH 2-24 DSE
Type nº 0 611 226 0.. 0 611 228 6..
Speed control no yes
Power input [W] 680 680
Power output [W] 390 390
Impact rate [min
–1
] 4850 0...4850
Impact energy per stroke [J] 2,4 2,4
Nominal speed rotation (approx.) [min
–1
] 870 0...870
Tool mount SDS-plus SDS-plus
Spindleneckdiameter (EuroNorm) [mm] Ø43 Ø43
Chisel adjustment - 36 posições
Drilling output (max.) [mm]:
Masonry
(corebi)
68 68
Stone 24 24
Wood 30 30
Steel 13 13
Weight (without access.) [kg] 2,4 2,4
Protection Class
/ II / II
GBH2 S__GBH2-24DSE 25/08/04, 15:3214

Other manuals for Bosch GBH 2 S

Related product manuals