Bosch GBH18V-26DK25 User Manual

1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
IMPORTANT
Read Before Using

IMPORTANT
Lire avant usage

IMPORTANTE
Leer antes de usar
For English Version
See page 2

Version française
Voir page 16

Versión en español
Ver la página 31
Call Toll Free for Consumer Information and Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
GBH18V-26D
2610051859_GBH18V-26D 1/8/19 9:49 AM Page 1

Bosch GBH18V-26DK25 Specifications

General

Category	Cordless
Voltage	18 V
Impact Energy	2.6 J
No-load Speed	0-900 / 0-1800 rpm
Weight	3.6 kg (with battery)
Max. Drilling Diameter in Steel	13 mm
Max. Drilling Diameter (Steel)	13 mm
Max. Drilling Diameter (Concrete)	26 mm
Battery Type	Lithium-Ion
Chuck Type	SDS plus
Optimum Range of Application in Concrete with Hammer Drill Bits	8 – 16 mm
Tool Holder	SDS plus
Chuck Size	SDS plus

Summary

Safety Symbols and General Warnings

Signal Word Definitions

Explains hazard levels for DANGER, WARNING, and CAUTION signals.

Work Area and Electrical Safety

Guidelines for maintaining a safe work environment and electrical precautions.

Personal Safety and Tool Handling

User alertness, PPE, preventing unintentional starts, and proper tool operation.

Power Tool Use and Care Guidelines

Battery Tool Use and Safety

Safe charging, usage, and precautions for battery packs to prevent hazards.

Cordless Hammer Drill Safety Rules

Operational Safety and Precautions

Covers hearing protection, auxiliary handles, and securing workpieces.

Drill Bit Installation and Handling

Accessory Handling and Chemical Exposure

Additional Safety and Maintenance Warnings

Electrical Safety Enhancements and Tool Maintenance

Functional Description and Specifications

Cordless Hammer Drill GBH18V-26D Components

Technical Specifications and Capabilities

Assembly and Setup

Battery Pack Installation and Removal

Step-by-step instructions for inserting and removing the battery pack.

Installing and Removing SDS-plus Accessories

Guide for attaching and detaching SDS-plus bits and accessories.

Using 3-Jaw Chuck and Auxiliary Handle

Depth Gauge Setting for Drilling Accuracy

Operating Instructions

Variable Speed Trigger and Forward/Reverse Control

How to operate the variable speed trigger and forward/reverse lever.

Mode Selector Dial and Application Settings

Explanation of different operating modes for various applications.

Vario-Lock, Slip Clutch, and Kickback Control

General Tool Tips and Drilling Advice

Drilling Techniques for Various Materials