2 609 932 592 | (2.7.07) Bosch Power Tools
16 | English
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for dry sanding and pol-
ishing of wood, plastic, metal, filler, as well as for
painted surfaces. It is ist especially suitable for
profiles, corners or hard to reach locations.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselection
3 Extraction outlet
4 Sanding sheet*
5 Sanding plate
6 SDS button for release of the sanding plate
7 Vacuum hose*
8 Pad extender*
9 Sanding plate for extender*
10 Narrow pad extender*
11 Narrow rounded pad extender*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 80 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=4.5 m/s
2
, Uncertain-
ty K =1.5 m/s
2
.
The vibration emission level given
in this information sheet has
been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this infor-
mation sheet. This could lead to a significant un-
derestimate of exposure when the tool is used
regularly in such a way.
Delta Sander GDA 280 E
Professional
Article number
0 601 294 7..
Rated power input
W 280
No-load speed
rpm 6500 – 9500
Orbital stroke rate
opm 13000 – 19000
Sanding plate size
(corner to corner)
mm 94
Orbit diameter
mm 2.0
Weight according to
EPTA-Procedure
01/2003
kg 1.1
Protection class
/II
The values given are valid for nominal voltages [U] of 230/240 V.
For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.
WARNING
OBJ_BUCH-428-001.book Page 16 Monday, July 2, 2007 10:58 AM
To Next Page
Loading...
