Bosch GEX12V-5 - Attaching a Vacuum Cleaner

(Fig. 7). Knock excess dust out of the bag, or
remove dust with your fingers or a soft brush.
You may notice that all the dust may not
come out of the bag. This will not affect
sanding performance but will reduce dust
collection efficiency.
NOTE: Do not wash the dust bag with soap
and water. Dust may become more firmly
lodged in the pores, which will reduce dust
collection.
2
3
1
FIG. 6
FIG. 7
FIG. 8
DUST
PORT
1-1/4”
OR
1-1/2” HOSE
VAC024
VAC002
BOSCH VAC-
SERIES HOSE
BOSCH VH-
SERIES HOSE
VX120
-11-
DUST
PORT
DUST
BAG
DUST BAG
ADAPTER
ATTACHING A VACUUM CLEANER
Dust collection can also be achieved by
attaching the tool to a vacuum cleaner / dust
extractor, hose and adapter, if necessary (all
sold separately).
1. Attach the hose to the vacuum cleaner /
dust extractor.
2. Attach the hose to the tool’s dust port in
one of the following ways (Fig. 8):
- Bosch VH-series hoses - The VX120 hose
adapter is required (included with VH-
series hoses).
- Other 35mm and 22mm hoses, such as the
Bosch VAC-series hoses - Connect hose
directly to the tool.
- Common 1-1/4” or 1-1/2” hoses - The
Bosch VAC002 or VAC024 adapter is
required.