EURO • BA 2 609 140 180 • GHO 26-82 • GB • OSW 02/04
English - 1
1 Fastening bolt for rebating depth stop*
2 Rebating depth stop*
3 Chip ejector (alternatively right/left)
4 Adjustment knob for planing depth
5 Planing depth scale
6 Change-lever for direction of chip ejection
7 Switch lock
8 On/Off switch
9 Belt cover
10 Screw for belt cover
11 Planer shoe
12 V-grooves
13 Parallel guide*
14 Fastening bolt for parallel and angle guide
15 Locking nut for adjustment of rebating width
16 Scale for rebating width
17 Angle guide*
18 Locking nut for angle adjustment
19 Dust/wood chip bag with adapter*
20 Vacuum hose*
21 Blade protector
22 Blade head
23 Blade-clamping element
24 Fastening screws for planer blade
25 Allen key
26 HM/TC planer blade
27 Large belt pulley
28 Drive belt
29 Small belt pulley
* Not all of the accessories illustrated or described are
included as standard delivery.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. Before using
for the first time, ask for a practical demon-
stration. In addition, the general safety notes
in the enclosed booklet must be observed.
■ Wear safety glasses, protective gloves and
sturdy shoes.
■ For long hair, wear hair protection. Work only
with closely fitting clothes.
■ If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
■ Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
■ Always direct the cable to the rear away from
the machine.
■ Apply the machine to the workpiece only when
switched on.
■ Use only sharp planing blades.
■ Always hold the machine firmly when working
and ensure a secure stance.
■ Keep hands away from rotating parts.
■ The planer shoe 11 must lay flat on the surface
when working.
■ Never plane over metal objects such as nails
or screws.
■ Do not allow fingers to enter the chip ejector 3.
■ Always switch the machine off and wait until it
has come to a standstill before placing it down.
■ Never allow children to use the machine.
■ Bosch is only able to ensure perfect operation
of the machine if the original accessories in-
tended for it are used.
Tool Specifications
Planer GHO 26-82
Order number 0 601 594 1..
Rated power [W] 710
Output power [W] 400
No-load speed [rpm] 16 500
Planing depth [mm] 0–2.6
Rebating depth [mm] 0–9.0
Planer width (max.) [mm] 82
Weight (without
accessories) approx.
[kg] 2.6
Protection class / II
Please observe the order number of your machine.
The trade names of the individual machines may vary.
Machine Elements
For Your Safety
2 609 140 180.book Seite 1 Mittwoch, 3. April 2002 9:19 09
11 • 2 609 140 180 • TMS • 08.03.02
To Next Page
Loading...
