To Next PageTo Next Page
Need help?Do you have a question about the Bosch GHO 40-82 C Professional and is the answer not in the manual?
Read all safety warnings and instructions to prevent electric shock, fire, and injury.
Ensure proper plugs, avoid body contact with earthed surfaces, protect from rain/wet conditions.
Wait for the cutter to stop before setting down the tool to avoid loss of control.
Hold by insulated surfaces only, as cutter may contact cord, causing shock.
Secure workpiece with clamps or platform for better control and to prevent injury.
Provides technical specifications such as article number, power, speed, and dimensions.
Details measured sound and vibration levels according to EN 60745 standards.
Caution when replacing planer blades; use only original Bosch carbide blades.
Check mains voltage and start the machine correctly.
Use lock-off button and On/Off switch; switch cannot be locked.
Instructions for planing, including applying machine, feed rate, and surface quality.
Adjust desired rebating width using locking nut 22.
Pull mains plug before work, keep machine clean, and ensure easy operation of park rest.
Sort machine, accessories, and packaging for environmental-friendly recycling.
General