18 | English 1 609 929 J94 • 6.11.06
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in elec-
tric shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
Intended Use
The power tool is intended for cutting wood length-
ways and crossways in straight lines and at bevel
angles of up to 45° on a firm surface.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 On/Off switch
2 Lock-off button for On/Off switch
3 Auxiliary handle
4 Spindle lock button
5 Scale for mitre angle
6 Allen key
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 Cutting mark, 45°
10 Cutting mark, 0°
11 Parallel guide
12 Retracting blade guard
13 Riving knife
14 Base plate
15 Wing bolt for bevel-angle preselection
16 Sawdust ejector
17 Blade guard
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Screw for attachment of riving knife
24 Clamping lever for cutting-depth preselection
25 Cutting-depth scale
26 Set of screw clamps*
27 Extraction adapter
28 Guide-rail adapter*
29 Guide rail*
30 Connection piece*
31 Vacuum hose*
*The accessories illustrated or described are not
included as standard delivery.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 95 dB(A); sound power level
106 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60745:
Vibrational emission value a
h
=<2.5m/s
2
, uncer-
tainty K = 1.5 m/s
2
.
The vibration emission level given in
this information sheet has been
measured in accordance with a standardised test
given in EN 60745 and may be used to compare one
tool with another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information
sheet. This could lead to a significant underestimate
of exposure when the tool is used regularly in such a
way.
Circular Saw GKS 160
PROFESSIONAL
Article number 3 601 F70 0..
Rated power input W 1050
No-load speed rpm 5600
Rotational speed under
load, max. rpm 4000
Riving knife thickness,
max.
mm 1.8
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
mm
mm
54
38
Spindle lock z
Base plate dimensions mm 146 x 290
Saw blade diameter, max. mm 160
Saw blade diameter, min. mm 150
Blade thickness, max. mm 1.7
Tooth thickness/setting,
max. mm 2.6
Tooth thickness/setting,
min.
mm 2.0
Mounting bore mm 20
Weight according to
EPTA-Procedure
01/2003
kg 3.6
Protection class / II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
WARNING
OBJ_BUCH-185-002.book Page 18 Monday, November 6, 2006 10:08 AM
To Next Page
Loading...
