Bosch GKS 235 PROFESSIONAL - Technical Data

English | 91 609 929 K68 • 10.7.07
Product Features
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 Blade guard
2 Lock-on button for On/Off switch
3 On/Off switch
4 Auxiliary handle
5 Spindle lock button
6 Scale for miter angle
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 Cutting mark, 45°
10 Cutting mark, 0°
11 Parallel guide
12 Retracting blade guard
13 Lever for retracting blade guard
14 Base plate
15 Wing bolt for bevel-angle preselection
16 Sawdust ejector
17 Hex key
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Fastening screw for extraction adapter*
24 Extraction adapter*
25 Clamping lever for cutting-depth preselection
26 Cutting-depth scale
27 Set of screw clamps*
28 Guide rail*
29 Connection piece*
30 Vacuum hose*
31 Guide-rail adapter*
*The accessories illustrated or described are not
included as standard delivery.
Technical Data
Circular Saw GKS 235
PROFESSIONAL
GKS 235
PROFESSIONAL
Article number 3 601 E7A 0.. 3 601 E7A 0..
Rated power input W 2100 2100
No-load speed rpm 5000 5000
Rotational speed under load (max.) rpm 3500 3500
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
mm
mm
85
65
85
65
Spindle lock zz
Base plate dimensions mm 383 x 170 383 x 170
Saw blade diameter, max. mm 235 235
Saw blade diameter, min. mm 230 230
Blade thickness, max. mm 2.2 2.2
Tooth thickness/setting, max. mm 3.2 3.2
Tooth thickness/setting, min. mm 2.0 2.0
Mounting bore mm 25 25.4
Weight according to EPTA-Procedure 01/2003 kg 7.6 7.6
Protection class / II / II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavorable mains
system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.
OBJ_BUCH-329-003.book Page 9 Tuesday, July 10, 2007 11:37 AM