To Next PageTo Next Page
Need help?Do you have a question about the Bosch GKS18V-26L and is the answer not in the manual?
Guidelines for maintaining a safe work environment and ensuring electrical safety.
Essential personal safety measures to prevent injury during tool operation.
Specific guidance on using and maintaining battery packs to ensure safety and longevity.
Best practices for making cuts and avoiding dangerous kickback situations with the saw.
Instructions for checking and ensuring the proper operation of the saw's lower guard.
Extra safety guidelines for using the circular saw, including material preparation and handling.
Detailed advice on preventing kickback and safety considerations for tool maintenance.
Information on potential health hazards from dust generated during operation and protective measures.
Defines the proper use of the saw and warns against cutting specific materials like metal or masonry.
Instructions on how to correctly install and remove the battery pack from the tool.
Detailed procedure for safely mounting the correct saw blade onto the tool.
Explains the purpose and operation of the Vari-Torque Clutch for kickback reduction.
Guidance on connecting dust extraction systems, including dust bags and hoses.
Instructions for connecting various vacuum hoses and adapters to the dust port.
Describes how the electric brake works to stop the saw blade and when to seek service.
Steps to ensure the saw blade is at a precise 90° angle to the footplate.
How to set and adjust the bevel angle for angled cuts.
Using guide notches on the footplate to accurately follow cut lines.
How to install the optional hanging hook for convenient storage.
Using safety lock-off buttons and the main trigger switch for tool operation.
Best practices for all cuts, including grip, saw movement, and resuming interrupted cuts.
Step-by-step instructions and safety warnings for making plunge cuts.
How to properly support and cut large panels to prevent binding and kickback.
Using the rip fence to make accurate rip cuts along the grain of the wood.
How to use a clamped board as a guide for rip cuts on large sheets.
Advice on tool service, battery care, motor, bearings, cleaning, and blade maintenance.
General