To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLL 2-50 and is the answer not in the manual?
General| Laser Diode | 635 nm, < 1 mW |
|---|---|
| Laser Class | 2 |
| Self-Leveling Range | ±4° |
| Accuracy | ±0.3 mm/m |
| Power Supply | 4 x 1.5 V LR6 (AA) |
| Storage Temperature | -20°C to +70°C |
| Weight | 0.45 kg |
| Dimensions | 118 x 57 x 89 mm |
| Dust and Splash Protection | IP54 |
| Tripod Thread | 1/4" |
| Leveling Time | 4 s |
| Range | 50 m |
| Operating Temperature | 0°C to +40°C |
Defines the tool's purpose for determining and checking horizontal and vertical lines.
Lists key specifications like working range, accuracy, temperature, and laser class.
Instructions for opening the battery lid, inserting batteries, and replacing them when the indicator flashes red.
Details on activating the pulse function for use with the laser receiver and its impact on visibility.
Instructions for working with and without automatic levelling, including compensation of irregularities.
Factors affecting accuracy, including ambient temperature, device impacts, and advice on checking accuracy.
Procedure to check the horizontal line's height accuracy using two walls and measurements.
Guidance on using the alignment plate for aligning the measuring tool or indicating lines at specific angles.
How to use the measuring plate to project laser marks and measure offsets or drops.
Instructions for using a tripod for a stable, height-adjustable measuring support.
When and how to use the laser receiver for improved visibility in difficult lighting or longer distances.
Information on laser viewing glasses, their function, and important safety warnings.
Illustrates practical applications like laying flooring plates at a 45° angle and projecting plumb points.
Guidelines for storing, transporting, and cleaning the measuring tool, advising against immersion in liquids.
Lists available accessories with their corresponding article numbers, including pouches, cases, and plates.
