6 | English
1 609 92A 0MH | (16.5.14) Bosch Power Tools
English
Safety Notes
All instructions must be read and observed
in order to work safely with the measuring
tool. Never make warning signs on the
measuring tool unrecognisable. SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE AND INCLUDE THEM WITH THE MEAS-
URING TOOL WHEN GIVING IT TO A THIRD
PARTY.
Caution – The use of other operating or adjusting
equipment or the application of other processing meth-
ods than those mentioned here can lead to dangerous
radiation exposure.
The measuring tool is provided with a warning label
(marked with number 5 in the representation of the
measuring tool on the graphics page).
If the text of the warning label is not in your national lan-
guage, stick the provided warning label in your national
language over it before operating for the first time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
If laser radiation strikes your eye, you must deliberately
close your eyes and immediately turn your head away
from the beam.
Do not make any modifications to the laser equipment.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Keep the measuring tool and the laser re-
ceiver 25 away from cardiac pacemakers.
The magnet inside the measuring tool and the
magnet plate 24 of the laser receiver gener-
ates a field that can impair the function of car-
diac pacemakers.
Keep the measuring tool and the laser receiver 25 away
from magnetic data media and magnetically-sensitive
equipment. The effect of the magnets can lead to irrevers-
ible data loss.
Product Description and
Specifications
Intended Use
The measuring tool is intended for levelling jobs with the use
of horizontal lines, vertical lines and the plumb point.
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 Latch of battery lid
3 Battery lid
4 Serial number
5 Laser warning label
6 Locking grooves of measuring tool
7 On/Off switch
8 Vial of rotating platform
9 Tripod mount 5/8"
10 Height adjustment screw of rotating platform
11 Fine adjustment knob of rotating platform
12 Rotating platform
13 Locking grooves of rotating platform
14 Working without automatic levelling indicator
15 Pulse-function indicator
16 Power indicator/Battery warning
17 Pulse-function button
18 Vertical mode button
19 Horizontal mode button
20 Measuring plate with stand*
21 Tripod*
22 Protective pouch
23 Laser viewing glasses*
24 Magnet plate*
25 Laser receiver*
26 Telescopic rod*
* The accessories illustrated or described are not included as
standard delivery.
OBJ_BUCH-2195-001.book Page 6 Friday, May 16, 2014 2:18 PM
To Next Page
Loading...
