Bosch GLL2-40 - Page 4

General
Safety
Rules
,Illtillllll?il
Bead
all
instructions.
Failure
to follow all instructions listed
below may
EIryiI
result in hazardous
radiation
exposure, electric shock, fire and/or
serious
injury.
The term
"tool"
in
all of the warnings
listed below refers to
your
mains-operated
(corded)
tool
or battery-operated
(cordless)
tool.
;;11l;lilllllil
The following labels
are on
your
laser
tool
for
your
convenience
and
EjlllllltlJltil
safety. They indicate where
the laser light is emitted
by the tool. ALWAYS
BE AWARE
of their location when
using the tool.
GLL2-40 3601K63711
3xAA1.5V
MadeinChina
a@)
2
tEc6o82s.r,2@2.03
:1 hW
@
630-670 dD
Do
not direct the laser
beam at
persons
or animals and do not
stare
into the laser
beam
yourself.
This tool
produces
laser
class 2 laser
radiation
and complies with
21
CFR
1040.10
and 1040.11 except for deviations
pursuant
to Laser Notice lrlo.
50, dated June 24,2007. This
can
lead
to
persons
being blinded.
DO NOT remove
or deface any warning or caution labels. Removing labels increases the risk
of
exposure to laser radiation.
Use of controls
or adjustments or
performance
of
procedures
other
than those
specified in this
manual, may result in hazardous radiation
exposure.
ALWAYS make
sure that any
bystanders
in the vicinity
of use are
made
aware of the dangers of
looking directly into
the
laser
tool.
DO
NOT
place
the laser tool in
a
position
that
may cause anyone to stare into the laser beam
intentionally
or unintentionally. Serious eye injury
could
result.
ALWAYS
position
the |aser tool
securely.
Damage
to the
laser
tool and/or serious injury to the
user could result if the laser tool fails.
ALWAYS use
only
the
accessories that are recommended
by
the manufacturer
of
your
laser
tool.
Use of accessories that have been designed for
use
with other laser tools
could
result in
serious injury.
DO NOT use this laser tool for
any
purpose
other than those
outlined
in this manual. This
could
result in
serious
injury.
DO NOT leave the laser
tool
"ON"
unattended in any operating mode.
DO
NOT disassemble the laser
tool. There are no user serviceable
parts
inside. Do not modify
the
product
in
any way. tt/odifying the laser tool may result in hazardous laser
radiation
exposure.
DO NOT use the laser viewing
glasses
as safety
goggles.
The laser viewing
glasses
are used
for improved visualization
of the laser
beam, but they do
not
protect
against laser radiation.
DO
NOT use the laser viewing
glasses
as
sun
glasses
or
in traffic. The laser viewing
glasses
do
not
afford complete
UV
protection
and reduce color
perception.
DO
NOT use any optical tools
such as, but not limited to, telescopes
or
transits
to
view
the laser
beam.
Serious eye injury could result.
DO NOT
stare directly at the laser
beam or
project
the laser
beam
directly into
the eyes of
others.
Serious eye injury could result.
SAVE THESE INSTRUCTIONS
-4-