Bosch GLL2-40 - Page 5

reduce
this risk,
and warnings
package.
Work
area safety
Keep work area
clean and well lit.
Cluttered
or
dark areas invite
accidents.
DO NOT
operate the laser
tool
around
children or
allow children
to operate the
laser tool.
Serious
eye
injury
could result.
Electrical
safety
Batteries
can
explode or
leak, cause injury
or fire. To
always follow
all
instructions
on the
battery label
and
DO NOT
short any
battery terminals.
DO NOT
charge alkaline
batteries.
DO NOT mix
old and new
batteries. Replace
all of them at the
same time with new
batteries
of the
same brand and type.
DO NOT mix
battery chemistries.
Dispose
of or recycle
batteries
per
local
code.
DO NOT
dispose of batteries in fire.
Keep
batteries
out of reach of children.
Remove
batteries if the device will not
be
used for several months.
Personal
safety
Stay
alert,
watch
what
you
are
doing and
use
common sense when
operating a tool.
Do not
use a tool while
you
are tired
or
under the influence
of drugs, alcohol or
medication.
A moment
of
inattention
while
operating a tool may result
in serious
personal
injury
or
incorrect
measurement results.
Use safety equipment. Always
wear eye
protection.
Safety equipment such as dust
mask,
non-skid safety shoes, hard
hat, or
hearing
protection
used for appropriate
conditions will reduce
personal
injuries.
Positioning Device
Keep
the Positioning Device
13 away f rom
cardiac
pacemakers.
The
magnets
generate
a
field
that can impair
the
function of
cardiac
pacemakers.
.
Keep the Positioning
Device 13
away
from
magnetic
data
medium
and
magnetically-sensitive
equipment. The
effect of the magnets
can lead to
irreversible
data loss.
Use and
care
Use the correct tool for
your
application.
The
correct tool will do the
job
better and
safer.
Do
not use the tool if the
switch does not
turn it
on and off. Any tool that
cannot
be
controlled with the
switch is dangerous
and
must
be
repaired.
Store idle tool
out of the reach
of children
and
do
not
allow
persons
unfamiliar with
the tool or these instructions
to operate
the
tool. Tools are dangerous in
the hands of
untrained users.
Maintain tools.
Check for misalignment
or
binding
of
moving
pafis,
breakage
of
pafts
and any other condition that may
affect the
operation. lf
damaged, tool repaired
before
use. lvlany
accidents are caused by
poorly
maintained
tools.
Use the tool,
accessories, etc., in
accordance with these instructions
and in
the manner intended for
the
particular
type
of tool, taking into account the working
conditions and the work
to be
performed.
Use of
the tool for
operations different from
those intended could result in
a hazardous
situation.
Service
Have
your
tool serviced by a
qualified
repair
person
using only identical
replacement
pafis.
This will ensure that
the
safety of the tool
is maintained.
Develop
a
periodic
maintenance
schedule
for tool. When cleaning a tool be
careful
not to
disassemble any
portion
of the tool
since
internal wires may
be misplaced or
pinched
or
may
be
improperly
mounted.
Certain cleaning agents such
as
gasoline,
carbon tetrachloride, ammonia,
etc. may
damage
plastic pafts.
SAVE THESE INSTRUCTIONS.
-5-
A
WARNING