-14-
Maintenance and Service
Keep the measuring tool clean at all times.
Do not immerse the measuring tool into water or other
fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Maintain the reception lens 7 in particular, with the same
care as required for eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken
in manufacturing and testing procedures, repair should
be carried out by an authorized after-sales service center
for Bosch power tools. Do not open the measuring tool
yourself.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries instead of disposing
of waste. The unit, accessories, packaging & used
batteries should be sorted for environmentally friendly
recycling in accordance with the latest regulations.
!
WARNING
Battery low indicator (a) appears
Battery voltage decreasing Replace batteries
(measurement still possible).
Battery low indicator (a) flashing; measurement not possible
Cause Corrective Measure
Battery voltage too low Replace batteries
All indicators on the display flash
The measuring tool is defective. Contact the Customer
Service
To Next Page
Loading...
Need help?
General
