Bosch GLM 100 C User Manual

-20-
Use only charger which accompanied your product
or direct replacement as listed in the catalog or
this manual. Do not substitute any other charger. Use only Bosch
approved chargers with you product.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery before using your measuring
tool for the first time.
The lithium-ion battery (integrated within the measuring tool) can be
charged at any time without reducing its service life.
Interrupting the charging procedure does not damage the battery.
When the bottom segment g flashes, only a few more measurements can
be carried out. Charge the battery.
Double indirect height measurement
Indirect length measurement
Timer function
Wall-surface measurement
Angle measurement
g Battery charge-control indicator
h Laser, switched on
i Measurement reference
k Temperature warning
l Bluetooth® Indicator
m Device charging indicator
Bluetooth® activated, connection established
Bluetooth® activated, no connection established
n Slow Charging
1
1
2
1
Preparation
!
WARNING

Bosch GLM 100 C Specifications

General

Measurement Range	0.05 – 100 m
Accuracy	± 1.5 mm
Laser Class	2
Bluetooth	Yes
Dust and Water Protection	IP54
Laser Diode	635 nm, < 1 mW
Measurement Time, typical	0.5 s
Measurement Time, max.	4 s
Memory Capacity (Values)	50
Dimensions	111 x 51 x 30 mm
Automatic Deactivation	5 min
Weight, approx.	0.14 kg
Units of Measurement	m, in, ft
Data Transfer	Bluetooth
Storage Temperature	-20°C to +70°C