To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLM 50 C Professional and is the answer not in the manual?
General| Type | Laser distance meter |
|---|---|
| Display type | Digital |
| Product color | Black, Blue |
| Memory function | Yes |
| Bluetooth version | 2.1+EDR |
| Distance measuring units | cm, ft, in, m |
| Number of memory records | 30 |
| International Protection (IP) code | IP54 |
| Mobile operating systems supported | Android 4.0, Android 4.1, Android 4.2, Android 4.3, Android 4.4, Android 5.0, Android 5.1 |
| Accuracy | 1.5 mm |
| Wavelength | 635 nm |
| Laser class | 2 |
| Maximum measurement distance | 50 m |
| Minimum measurement distance | 0.05 m |
| Battery type | AAA |
| Battery voltage | 1.5 V |
| Auto power off after | 5 min |
Weight and Dimensions| Depth | 106 mm |
|---|---|
| Width | 45 mm |
| Height | 24 mm |
| Weight | 100 g |
Read and observe all instructions for safe operation. Integrated protections may be compromised.
Do not point laser at people or animals. Do not stare into beam. Close eyes if hit.
For measuring distances, lengths, heights, inclines, areas, volumes.
Article number, measuring range, accuracy, power, dimensions, and other specifications.
Numbered list of product parts referencing the illustration on the graphic page.
Description of status indicators, icons, and elements shown on the display.
How to insert or replace batteries, paying attention to polarity.
Do not leave unattended, protect from moisture/sunlight, avoid impacts.
How to turn the measuring tool and laser on and off.
Steps to initiate and perform measurements, and select reference level.
How to perform standard length measurements.
How to measure continuously while moving the tool.
How to measure areas by measuring width and length.
How to measure volumes by measuring width, length, and depth.
Methods for measuring distances obstructed from direct measurement.
Measuring height indirectly using angles.
Measuring height indirectly using two angles.
Measuring length indirectly using angles.
Determining the sum of individual surfaces with a common height.
Repeatedly measuring a defined length for material cutting or stud wall installation.
Measuring slopes/inclines and checking horizontal/vertical alignment.
How to retrieve and view saved measurement values.
Deleting memory content or individual values.
How to add or subtract measured values.
How to switch between metric and imperial units.
How the tool transmits data wirelessly via Bluetooth.
Steps to activate Bluetooth on the tool and mobile device.
How to turn off the Bluetooth connection and signal.
Notes on covering reception lens, moving the tool during measurement.
Factors affecting the measuring range like lighting and reflectivity.
Factors causing faulty measurements like surface type.
How to check and calibrate grade measurement accuracy.
How to check the accuracy of distance measurements.
How to use a tripod for more accurate measurements.
What to do if an "Error" message appears on the display.
How to keep the tool clean and functional.
Contact information for service, repairs, and spare parts.
How to dispose of the tool and batteries environmentally.
