To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLM 50 Professional and is the answer not in the manual?
General| Accuracy | ±1.5 mm |
|---|---|
| Laser Class | 2 |
| Power Supply | 2 x 1.5 V LR03 (AAA) |
| Weight | 0.1 kg |
| Laser Diode | 635 nm, <1 mW |
| Measuring Range of Incline Measurement | 0 – 360° (4 x 90°) |
| Measuring Accuracy (typical) | ±0.2° |
| Measurement Time, Typical | <0.5 s |
| Measurement Time, Max | 4 s |
| Automatic Deactivation | 5 min |
| Memory Capacity (values) | 30 |
| Dust and Splash Protection | IP54 |
| Operating Temperature | -10 – 45 °C |
| Storage Temperature | -20 – 70 °C |
| Measuring Range | 0.05 – 50 m |
| Units of Measurement | m/cm, ft/in |
| Battery Life | Approx. 10, 000 measurements |
Explains the purpose and application range of the measuring tool.
Lists detailed technical specifications, ranges, and dimensions of the device.
Instructions for inserting or replacing batteries in the measuring tool.
Guidance on the first steps and initial setup for using the measuring tool.
Step-by-step instructions on how to perform measurements with the device.
How to choose and set the measurement reference point on the tool.
Information about the automatic display illumination feature.
Details on different measurement modes like length, area, and volume.
Instructions for using the continuous tracking measurement mode.
How to measure heights indirectly using the Pythagoras theorem.
Procedure for summing up multiple measurement results.
Procedure for subtracting measurement results.
General recommendations and tips for effective tool operation.
Factors that can affect the range of measurements.
Factors that can impact the accuracy of measurement results.
