Need help?Do you have a question about the Bosch GLM 500 and is the answer not in the manual?
General| Accuracy | ±1.5 mm |
|---|---|
| Laser Class | 2 |
| Power Supply | 2 x 1.5 V LR03 (AAA) |
| Weight | 0.1 kg |
| Laser Diode | 635 nm, <1 mW |
| Measuring Accuracy (Typical) | ±0.2° |
| Measurement Time, Typical | <0.5 s |
| Measurement Time, Max | 4 s |
| Automatic Deactivation | 5 min |
| Memory Capacity (Values) | 30 |
| Dust and Splash Protection | IP54 |
| Tripod Thread | 1/4" |
| Data Transfer | Bluetooth |
| Dimensions | 106 x 45 x 24 mm |
| Operating Temperature | -10 – 45 °C |
| Measurement Range | 0.05 m to 50 m |
| Measuring Range of Tilt Measurement | 0 – 360° (4 x 90°) |
| Units of Measurement | m, in, ft, ft+in |
| Battery Life | 2.5 h |
| Storage Temperature | -20 – 70 °C |
Essential safety guidelines for operating the laser measuring tool to prevent injury and damage.
Details the specific applications and functions of the Bosch GLM 500 measuring tool.
Provides key specifications, including measuring ranges, accuracy, and operating conditions.
Instructions for inserting and replacing batteries and assembling accessories.
Covers powering the device on/off and initial setup procedures.
Explains how to perform measurements and select reference planes.
Outlines the different measurement modes available, such as length, area, and volume.
Describes techniques for measuring distances indirectly, like height and length.
Instructions for using the tool to measure slopes and check alignment.
Details how to save, recall, add, subtract, and delete measured values.
Provides tips for effective use and discusses factors affecting measurement accuracy.
Explains how to verify and recalibrate the measuring tool's accuracy.
Guidance on cleaning, care, and seeking professional repair for the device.
To Next Page
