Need help?Do you have a question about the Bosch Professional GLM 500 and is the answer not in the manual?
General| Accuracy | ± 1.5 mm |
|---|---|
| Laser Class | 2 |
| Laser Diode | 635 nm, < 1 mW |
| Display | LCD with backlight |
| Protection Class | IP54 |
| Measuring accuracy (typical) | ± 0.2° |
| Measurement time, typical | 0.5 s |
| Measurement time, max. | 4 s |
| Units of measurement | m, ft, in |
| Memory capacity (values) | 30 |
| Tripod thread | 1/4" |
| Automatic deactivation | after 5 minutes |
| Battery Life | up to 10, 000 measurements |
| Weight | 0.1 kg |
| Storage Temperature | -20 to 70 °C |
| Measuring range of incline measurement | 0 – 360° (4 x 90°) |
| Dust and splash protection | IP 54 |
| Data transfer | Bluetooth |
Defines the purpose and application scope of the measuring tool for distances, lengths, and volumes.
Lists and describes the key components and functionalities of the measuring tool as shown in illustrations.
Instructions for properly installing and replacing the batteries in the measuring tool.
Initial steps and precautions for turning on and preparing the measuring tool for use.
Detailed steps for performing basic length measurements using the device.
How to use the tool for real-time, ongoing distance measurements.
Important general tips for optimal use and care of the measuring tool.
Factors affecting the tool's measuring range, such as lighting and target surface properties.
Factors that can lead to inaccurate readings, such as surface types and environmental conditions.
Instructions for keeping the measuring tool clean and in good working order.
To Next Page