38 | English
Set the reference level for measurements with a
tripod by pressing the button (4) accordingly
(thread reference level).
Error message
If a measurement cannot be performed correctly,
the "Error" message appears in the display. Switch
the measuring tool off and back on, and start the
measurement again.
The measuring tool monitors correct
functioning in every measurement. If a
defect is detected, the display will in-
dicate only the symbol shown opposite
and the measuring tool switches itself off. In this
case, have the measuring tool checked by an after-
sales service agent for Bosch power tools.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or
other liquids.
Wipe off any dirt using a damp, soft cloth. Do not
use any detergents or solvents.
Take particular care of the reception lens (14),
which must be handled with the same level of care
1 609 92A 5E4 | (07.05.2020) Bosch Power Tools
To Next Page
Loading...
