Bosch Professional GLM 500 - Subtracting values; Deleting measured values

English | 33
143.45 m
2
2
+93.406
m50.039
0.0°
m
2
Press the [+] button (3). The calcu-
lated area and the + symbol will be dis-
played.
Press the measuring button (2) [
] to
start another area measurement.
Measure the area as described in the section on
area measurement (see "Area measurement",
page26). Once the second measurement is com-
pleted, the result of the second area measurement
is displayed below. To show the end result, press
the measuring button (2) [
] once more.
Note: In the case of a length measurement, the
end result is displayed immediately.
To exit addition, press the [Func] button (7).
Subtracting values
To subtract values, press the button (8) [–]. The
subsequent steps are the same as for the section
on adding values.
Deleting measured values
Briefly pressing the on/off button (5) [
] will de-
lete the last measured value in all measuring func-
tions. Repeatedly pressing the on/off button (5)
[
] briefly will delete the measured values in re-
verse order.
Bosch Power Tools 1 609 92A 5E4 | (07.05.2020)