Bosch Professional GLM 500 - Inclination measurement; Memory functions

English | 31
36.0°
Inclination measurement is used to
measure a slope or incline (e.g. of
stairs, railings, when fitting furniture,
laying pipes, etc.).
The left-hand side of the measuring
tool serves as the reference level for inclination
measurement. If the display flashes during meas-
urement, the measuring tool has been tipped too
heavily to the side.
Memory functions
The value or end result of each completed meas-
urement is automatically saved.
Memory value display
Maximum 20 values (measured values or end res-
ults) can be retrieved.
Press the memory button (6) [
].
430.16 m
8.890 m
3
7.620 m
m6.350
4
The number of the memory value is
shown at the top of the display, the
corresponding memory value is shown
at the bottom, and the corresponding
measuring function is shown on the
left.
Press the [+] button (3) to browse forwards
through the saved values.
Press the [–] button (8) to browse backwards
through the saved values.
Bosch Power Tools 1 609 92A 5E4 | (07.05.2020)