Bosch Professional GLM 500 - Area measurement

26 | English
Move the measuring tool until the desired distance
is shown at the bottom of the display.
11.623 m
-64°
Briefly pressing the measuring button
(2) [
] will interrupt the continuous
measurement. The current measured
value will be shown at the bottom of
the display. Pressing the measuring
button (2) [
] once more will start the continuous
measurement again.
Continuous measurement automatically switches
off after fiveminutes.
Area measurement
Select the area measurement mode
.
Then measure the width and length one after the
other as with a length measurement. The laser
beam remains switched on between the two meas-
urements. The distance to be measured flashes in
the indicator for area measurement
.
19.355 m
2
0.0°
5.080 m
3.810 m
The first measured value is shown at
the top of the display.
After the second measurement has
been completed, the area will be auto-
matically calculated and displayed. The
end result is shown at the bottom of the display,
while the individual measured values are shown
1 609 92A 5E4 | (07.05.2020) Bosch Power Tools