20 | English
Assembly
Inserting/changing the batteries
It is recommended that you use alkaline man-
ganese or rechargeable batteries to operate the
measuring tool.
With 1.2 V batteries fewer measurements may be
possible than with 1.5 V batteries.
Press the locking mechanism (10) to open the bat-
tery compartment cover (9) and remove the bat-
tery compartment cover. Insert the batteries.
When inserting the batteries, ensure that the po-
larity is correct according to the illustration on the
inside of the battery compartment.
When the empty battery symbol first appears on
the display, approx. 100 measurements are still
possible. When the battery symbol is empty and
flashes red, no further measurements are pos-
sible. Replace the batteries.
Always replace all the batteries at the same time.
Only use batteries from the same manufacturer
and which have the same capacity.
u Take the batteries out of the measuring tool
when you are not using it for a prolonged
period of time. The batteries can corrode and
self-discharge during prolonged storage.
1 609 92A 5E4 | (07.05.2020) Bosch Power Tools
To Next Page
Loading...
