Bosch Professional GLM 500 - Changing the unit of measurement; Switching sound on;off

34 | English
Changing the unit of measurement
The default unit of measurement is "m" (metres).
Switch on the measuring tool.
To enter the "Basic settings" menu, press and hold
the [Func] button (7). Choose from the following
depending on the type of measuring tool you are
using:
– "m/cm" (3601K72H50)
– "ft/m" (3601K72HK0)
– "
/m" (3601K72HC0)
Press the (3) [+] button or the (8) [–] button to
change the unit of measurement.
To exit the menu item, press the on/off button (5)
[
]. The selected setting remains saved after you
switch off the measuring tool.
Switching sound on/off
The sound is switched on by default.
Switch on the measuring tool.
To enter the basic settings menu, press and hold
the [Func] button (7). Select
. Press the [+] but-
ton (3) or the [–] button (8) to switch the sound
on and off.
To exit the menu item, press the measuring button
(2) [
] or the on/off button (5) [ ]. The selected
1 609 92A 5E4 | (07.05.2020) Bosch Power Tools