To Next PageTo Next PageWhat to do if there is a faulty clock display on my Bosch GML 24 V Radio?
If you notice a faulty clock display on your Bosch Radio, it's likely that the clock batteries are dead. Replace the AAA batteries and then reset the clock.
How to improve the radio reception on a Bosch GML 24 V?
If you're experiencing insufficient radio reception on your Bosch Radio, try placing the radio charger in a different location. Additionally, adjust the aerial to different directions to optimize reception.
Why is the 12 V connection not operative on my Bosch Radio?
If the 12 V connection on your Bosch Radio is not working, check if the fuse for the 12 V connection is inserted. If not, insert a 5 x 20 mm 1 A fuse. If the fuse is defective, replace it.
General| Bluetooth | Yes |
|---|---|
| Radio Bands | FM, AM |
| FM Frequency Range | 87.5 - 108 MHz |
| Speaker Output | 10 W |
| Speakers | 2 |
| Protection Class | IP54 |
| Operating Temperature | -10°C to +50°C |
| Power Source | Battery/AC |
| AM Frequency Range | 531 - 1602 kHz |
Keep work area clean and well lit. Cluttered and dark work areas invite accidents.
Ensure plugs match outlets, never modify plugs, and avoid adapter plugs with earthed devices.
Repairs must be done by qualified technicians using original spare parts for safety.
Observe correct mains voltage; connect to power source matching the type plate.
Pivot the mounted rod aerial for best reception.
Reduce volume, then tune using control knob 14 or 24 for desired frequency.
Store up to 20 FM and 10 AM stations using the MEMORY button.
Open/close drive, place CD centrally, select track, and play.
Program up to 20 tracks in a desired order using the MEMORY button.
Play all tracks on a CD repeatedly using the REPEAT mode button.
Repeatedly play a single track on the CD using the REPEAT mode button.
Play all tracks in a random sequence using the RANDOM mode button.
Connect external audio sources via AUX socket 44.
Manually adjust bass/treble or select from 5 preset equalizer settings.
Switch digital sound processor on/off for optimized sound playback.
Unscrew compartment, replace battery (CR2032), and fasten lid securely.
Open battery compartment lid 48, insert battery 50 into compartment 49.
Intelligent charging detects battery condition and optimizes current for longevity.
Connect external 12V device (max 1A) to socket 46. Check fuse 45 if needed.
Use outlets 43 for external tools, minding maximum current consumption limits.
Open compartment lid 48, slide lever, replace AAA batteries, reattach lid.
Guide to identify and resolve common problems with the radio charger.
Pull plug before work. Repairs by authorized service centre only. Include article number.
Mains cable has a safety connection and must be replaced by an authorized agent.
Recycle power tools, accessories, and packaging. Do not dispose of in household waste.
