EasyManua.ls Logo

Bosch GS-60 - Maintenance; Cutting hair and threads; Using the parking aid; Vacuuming stairs

Bosch GS-60
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Vacuuming
16
15
Maintenance
Always switch off the vacuum cleaner and pull out the plug before
performing any maintenance work. Remove the turbo brush from the
suction / telescopic pipe.
Figure
● Cut off any wrapped around hair or threads using a pair of scissors.
Figure
● Then vacuum up the threads and hair using the corner nozzle.
Figure
You can use the parking aid on the side of the vacuum cleaner if you wish to
stop vacuuming for a short time.
● Once you have switched off the appliance, slide the hook on the floor
tool into the recess on the side of the appliance.
Figure
When vacuuming stairs, the appliance must be positioned at the bottom of
the stairs. Depending on the type of staircase, you can vacuum 12 to 16 stairs
with the suction pipe, handle and floor tool fitted. If they do not reach far
enough, the appliance can also be carried using the carrying handle.
13
14
15
16
14
13
GB_internet_BGS60:GB_internet_BGS60 08.02.2010 10:39 Seite 9