To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB Professional 18-2 and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Battery type | Li-Ion |
| Max Torque | 63 Nm |
| Max. drilling diameter in wood | 38 mm |
| Torque settings | 20+1 |
| Chuck Size | 13 mm |
| Chuck capacity, min/max | 1.5 - 13 mm |
| No-load Speed | 0 - 1, 900 rpm |
| No-load speed (1st gear / 2nd gear) | 0 – 500 / 0 – 1, 900 rpm |
| Weight | 1.7 kg |
Keep work area clean, avoid explosive atmospheres, keep children away.
Match plugs, avoid earthed surfaces, do not expose to rain, do not abuse cord.
Stay alert, use PPE, prevent unintentional starting, avoid overreaching, dress properly.
Do not force tool, use correct tool, maintain tools, keep tools sharp, use according to instructions.
Have tool serviced by qualified person using identical replacement parts.
Machine for impact drilling in brick, concrete, stone, wood, metal, plastic; also for screwdriving.
Lists numbered product features referring to illustrations on graphics page.
Operate machine only with auxiliary handle, adjust position for posture.
Set desired drilling depth X using depth stop 11.
Quick, convenient tool change in the drill chuck.
Insert and clamp tool using chuck key.
Use universal bit holder for screwdriver bits 14.
Replace drill chuck by authorized service agent if without spindle lock.
Remove chuck using Allen key 16 or spanner.
Mount chuck in reverse order, tighten to approx. 35-40 Nm.
Actuate switch 7 to reverse rotation direction.
Set selector switch 2 for drilling or impact drilling.
Preselect two speed ranges using gear selector 8.
Start/stop machine using switch 5, lock-on button 4.
Use thumbwheel 6 for speed preselection.
Keep machine and ventilation slots clean; pull mains plug before work.
