Bosch GSR 18V-60 C - Page 4

16 | English
Cordless Drill/Driver GSR 18V-60 C GSB 18V-60 C
– First gear min
-1
0–600 0–600
– Second gear min
-1
0–1,900 0–1,900
Impact rate min
-1
– 0–28,500
Torque, hard/soft screwdriving application according to
ISO 5393 (2017)
A)
Nm 60/31 60/31
Max. drilling diameter
– Wood mm 38 38
– Steel mm 13 13
– Masonry mm – 13
Tool holder mm 1.5–13 1.5–13
Max. screw diameter mm 10 10
Weight according to EPTA-Procedure01:2014
B)
kg 1.5–2.5 1.6–2.6
Recommended ambient temperature during charging °C 0 to +35 0 to +35
Permitted ambient temperature during operation and
during storage
°C –20 to +50 –20 to +50
Recommended rechargeable batteries GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
A)
Measured at 20–25°C with rechargeable battery GBA 18V 4.0Ah.
B)
Measured withGBA 18V 1.5Ah andGBA 18V 12Ah.
Noise/Vibration Information
GSR 18V-60 C GSB 18V-60 C
Noise emission values determined according toEN62841-2-1.
The noise level when working can exceed the volume stated.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
UncertaintyK
Wear hearing protection!
dB(A)
dB(A)
dB
75
86
5
87
98
5
Vibration total values a
h
(triax vector sum) and uncertainty K determined according toEN62841-2-1:
Drilling
a
h
K
m/s
2
m/s
2
< 2.5
1.5
< 2.5
1.5
Impact drilling
a
h
K
m/s
2
m/s
2
–
–
10.5
1.5
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
1 609 92A 5U1 | (02.11.2021) Bosch Power Tools