To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GSR 180-LI and is the answer not in the manual?
General| Battery Voltage | 18 V |
|---|---|
| Max Torque | 54 Nm |
| No-load Speed (1st gear) | 0 - 450 rpm |
| No-load Speed (2nd gear) | 0 - 1700 rpm |
| Chuck Capacity | 1.5 - 13 mm |
| Drilling Diameter in Wood | 35 mm |
| Drilling Diameter in Steel | 10 mm |
| Weight (with battery) | 1.6 kg |
| Battery Type | Li-ion |
| Screw Diameter, max | 10 mm |
| Torque settings | 20+1 |
Stay alert, use PPE, prevent unintentional starting, dress properly.
Use correct tool, maintain, do not force, disconnect power.
Use correct charger, keep away from metal, avoid heat.
Driving/loosening screws and drilling in wood, metal, ceramic, plastic.
Lists numbered components of the power tool shown in diagrams.
Details article number, voltage, speed, torque, drilling diameter, weight.
Provides noise emission and vibration values according to EN standards.
How to detach the battery pack from the tool.
Instructions for charging the battery pack using the correct charger.
Instructions on how to change accessories like drill bits or screwdriver bits.
Inserting the battery and setting rotational direction.
How to set mode (Drilling, Screwdriving, Impact drilling) and pre-select torque.
Adjusting speed via trigger and selecting gear range for different tasks.
Tips for proper tool usage, like sliding switches fully and applying power correctly.
Keeping the tool clean, especially ventilation slots.
Procedure for checking and replacing worn carbon brushes.
Information on obtaining spare parts, repair, and product advice.
