Bosch GSR 18V-85 C - Page 16

16 | English
Bluetooth
®
in aircraft. Avoid using the product near
your body for extended periods.
The Bluetooth
®
word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick, concrete and
stone.
With the Bluetooth
®
Low Energy Module GCY42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
®
wire-
less technology.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Depth stop
(4)
Auxiliary handle (insulated gripping surface)
(5)
Intermediate piece of auxiliary handle
(6)
Wing bolt for depth stop adjustment
(7)
Torque presetting ring
(8)
Mode selector switch
(9)
Gear selector switch
(10)
Belt clip
(11)
Battery
(12)
Battery release button
(13)
Worklight
(14)
Overload protector indicator
(15)
Universal bit holder
A)
(16)
Rotational direction switch
(17)
On/off switch
(18)
Handle (insulated gripping surface)
(19) Bluetooth® Low Energy Module cover GCY42
(20)
Battery charge indicator button
(21)
Battery charge indicator
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless drill/driver GSR 18V-85 C GSB 18V-85 C
Article number
3601JG01.. 3601JG03..
Rated voltage V= 18 18
No-load speed
A)
– First gear min
-1
0–480 0–480
– Second gear min
-1
0–2100 0–2100
Impact rate
A)
min
-1
– 0–31500
Max. torque, hard/soft screwdriving applica-
tion according to ISO 5393
A)
Nm 85/47 85/47
Max. drilling diameter
– Wood mm 82 82
– Steel mm 13 13
– Masonry mm − 16
Tool holder 1.5–13 1.5–13
Max. screw diameter mm 12 12
Weight according to EPTA-Procedure
01:2014
A)
kg 2.0–3.0 2.0–3.0
Recommended ambient temperature during
charging
°C 0 to +35 0 to +35
1 609 92A 4T1 | (06.02.2020) Bosch Power Tools