Bosch GSR Series User Manual

English | 17
Cordless drill/driver GSR 14.4 VE-2-LI GSR 18 VE-2-LI GSB 14.4 VE-2-LI GSB 18 VE-2-LI
Tool holder 1.5–13 1.5–13 1.5–13 1.5–13
Screw diameter max. mm 10 12 10 10
Weight according to EPTA-Pro-
cedure 01:2014
A)
kg 2.1–2.3 2.0–3.1 2.2–2.4 2.0–3.1
Recommended ambient temper-
ature during charging
°C 0 to +35 0 to +35 0 to +35 0 to +35
Permitted ambient temperature
during operation
B)
and during
storage
°C –20 to +50 –20 to +50 –20 to +50 –20 to +50
Recommended batteries GBA 14.4V... GBA 18V...
ProCORE18V...
GBA 14.4V... GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/vibration information
Noise emission values determined according to
EN62841-2-1.
GSR 14.4/18 VE-2-LI:
Typically, the A-weighted sound pressure level of the power
tool is 75dB(A). Uncertainty K=3dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
GSB 14.4/18 VE-2-LI:
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 91dB(A); sound power level
102dB(A). Uncertainty K=5dB.
Wear hearing protection!
GSR 14.4/18 VE-2-LI GSB 14.4/18 VE-2-LI
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to EN62841-2-1:
Drilling into metal:
a
h
K
m/s
2
m/s
2
< 2.5
1.5
< 2.5
1.5
Impact drilling into concrete:
a
h
K
m/s
2
m/s
2
–
–
14.0
1.5
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Charging the Battery
u Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Bosch Power Tools 1 609 92A 4V5 | (13.11.2019)

Bosch GSR Series Specifications

General

Chuck Type	Keyless
Battery Type	Li-Ion
Power Source	Cordless
Battery Voltage	12V or 18V (depending on model)
Chuck Size	10mm or 13mm (depending on model)
Torque Settings	20+1 (depending on model)