1 609 929 N39 | (12.6.08) Bosch Power Tools
8 | English
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Dust bag
2 Sanding plate
3 Sanding-sheet clamp
4 Sanding sheet
5 Release button for front clamping bracket
6 Front clamping bracket
7 On/Off switch
8 Outlet piece
9 Extraction adapter*
10 Vacuum hose*
11 Perforating tool*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Assembly
f Before any work on the power tool itself,
pull the mains plug.
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in con-
nection with wood-treatment additives (chro-
mate, wood preservative). Materials contain-
ing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter-class
respirator.
Observe the relevant regulations in your coun-
try for the materials to be worked.
External Dust Extraction (see figure A)
Slide the extraction adapter 9 onto the outlet
piece 8. Ensure that the latching levers of the ex-
traction adapter engage. The extraction adapter
9 accepts a vacuum hose with a diameter of
19 mm.
For removal of the extraction adapter 9, press
the latching levers together at the rear and pull
the extraction adapter off.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially detri-
mental to health or carcinogenic, use a special
vacuum cleaner.
Integrated Dust Extraction with Dust Bag
(see figure B)
For small sanding jobs, a dust bag 1 (accessory)
can be connected. Attach the sleeve of the dust
bag firmly onto the outlet piece 8. To maintain
optimum dust collection, empty the dust bag 1 in
good time.
Orbital sander GSS 140 A
Professional
Article number
0 601 297 0..
Rated power input
W180
No-load speed
rpm 12000
No-load orbital stroke rate
opm 24000
Orbit diameter
mm 1.6
Sanding sheet dimen-
sions
— Adhesion via
Velcro backing
— Attachment via
clamping
mm
mm
115 x 107
115 x 140
Sanding plate dimensions
mm 113 x 105
Weight according to
EPTA-Procedure 01/2003
kg 1.4
Protection class
/II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your power tool. The trade names of individual tools may
vary.
OBJ_DOKU-13281-001.fm Page 8 Thursday, June 12, 2008 3:32 PM
To Next Page
Loading...
