To Next PageTo Next Page
Need help?Do you have a question about the Bosch GPO 14 CE and is the answer not in the manual?
Diagram showing numbered parts of the GPO 14 CE tool.
Essential safety precautions for operating power tools safely.
Maintaining a safe work environment and electrical precautions.
Measures to ensure operator safety during use.
Common safety for sanding, brushing, and polishing.
Safety advice for sanding, polishing, and wire brushing.
General safety advice not covered elsewhere.
Understanding and avoiding kickback during operation.
Safety for sanding, polishing, and wire brushing operations.
Safety advice for tool handling and environment.
Technical details of the GPO 14 CE polisher.
Measured noise and vibration emission levels.
CE conformity statement for the product.
Instructions for fitting protective guards.
Steps for attaching various grinding and polishing accessories.
Health and safety advice for dust and chip removal.
How to start, stop, and lock the power tool.
Adjusting the tool's speed for different applications.
Guidelines for keeping the tool clean and in good working order.
Diagram showing numbered parts of the GPO 14 CE tool.
Essential safety precautions for operating power tools safely.
Maintaining a safe work environment and electrical precautions.
Measures to ensure operator safety during use.
Common safety for sanding, brushing, and polishing.
Safety advice for sanding, polishing, and wire brushing.
General safety advice not covered elsewhere.
Understanding and avoiding kickback during operation.
Safety for sanding, polishing, and wire brushing operations.
Safety advice for tool handling and environment.
Technical details of the GPO 14 CE polisher.
Measured noise and vibration emission levels.
CE conformity statement for the product.
Instructions for fitting protective guards.
Steps for attaching various grinding and polishing accessories.
Health and safety advice for dust and chip removal.
How to start, stop, and lock the power tool.
Adjusting the tool's speed for different applications.
Guidelines for keeping the tool clean and in good working order.
General| Power Input | 1400 W |
|---|---|
| No-load Speed | 750 - 3000 rpm |
| Disc Diameter | 180 mm |
| Weight | 2.5 kg |
| Spindle Thread | M14 |
