Bosch GWS Professional 9-115 P User Manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
1 609 92A 0ED (2013.08) PS / 272 EURO
GWS Professional
9-115 P | 9-125 P | 11-125 P | 12-125 CIP | 12-125 CIEP |
15-125 CIP | 15-125 CIEP | 15-150 CIP
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_BUCH-1660-005.book Page 1 Monday, August 26, 2013 3:30 PM

Bosch GWS Professional 9-115 P Specifications

General

Rated input power	900 W
Disc diameter	115 mm
Weight	1.9 kg
Power output	450 W
Spindle thread	M14
Cable length	2.5 m
Vibration emission value	6.5 m/s²

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, avoid explosive atmospheres, keep bystanders away.

Electrical Safety

Ensure correct plugs, avoid contact with earthed surfaces, do not expose to rain.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, do not overreach.

Power Tool Use and Care

Safety Warnings for Angle Grinder

Safety Warnings common for Grinding, Sanding, Wire Brushing or Abrasive Cutting Off Operations

Follow all warnings, do not use for polishing, use recommended accessories.

Kickback and Related Warnings

Safety warnings specific for Grinding and Abrasive Cutting-Off operations

Use recommended wheels, ensure proper mounting and guards, avoid side forces.

Additional safety warnings specific for abrasive cutting off operations

Do not jam wheel, avoid positioning body behind wheel, support workpieces.

Additional Safety and Working Instructions

Symbols

Intended Use

Technical Data

Noise/Vibration Information

Mounting and Operation

Grinding, preparation

Instructions for grinding preparation with figures and page references.

Cutting, preparation

Instructions for cutting preparation with figures and page references.

Cutting stone, brick and tiles, preparation (recommendation)

Recommendations for cutting stone, brick, and tiles.

Sanding with extraction hood, preparation

Instructions for sanding preparation with dust extraction.

Removing paint, preparation

Instructions for paint removal preparation.

Removing rust, preparation

Drilling tiles, preparation

Mounting the quick-clamping nut

Dismounting the quick-clamping nut

Switching On and Off

Adjusting the speed preselection

Working effectively with the angle grinder

Selecting the admissible grinding tool

Maintenance and Cleaning