Bosch GWS10-450 - Page 11

-11-
Model number GWS10-450 GWS10-450P GWS10-450PD
Amps 10 10 10
Rated speed n 11,000/min n 11,000/min n 11,000/min
Switch Type Side Paddle Paddle
Spindle thread 5/8"-11 UNC 5/8"-11 UNC 5/8"-11 UNC
Max.Type 27 grinding wheel ⌀ 4 1/2" (115mm) 4 1/2" (115mm ) 4 1/2" (115mm)
Type 27 grinding wheel thickness
1/8" - 1/4"
(3mm - 6mm)
1/8" - 1/4"
(3mm - 6mm)
1/8" - 1/4"
(3mm - 6mm)
Max.Type 27A/42 cutting wheel ⌀ 4 1/2" (115mm) 4 1/2" (115mm ) 4 1/2" (115mm)
Max. flap disc ⌀ 4 1/2" (115mm) 4 1/2" (115mm ) 4 1/2" (115mm)
Max. sanding disc ⌀ 4 1/2" (115mm) 4 1/2" (115mm ) 4 1/2" (115mm)
Max. wire wheel ⌀ 4" (102mm) 4" (102mm) 4" (102mm)
Max. wire cup brush ⌀ 3" (76 mm) 3" (76 mm) 3" (76 mm)
Functional Description and Specifications
Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety
measures reduce the risk of starting the tool accidentally.
X = Tool is provided with attachments to perform this application.
O = Tool can use optional attachments to perform this application.
N = Tool is not capable of this application.
* Hand Shield (sold separately) is required.
Application
Model Number GWS10-450 GWS10-450P GWS10-450PD
Metal Grinding (Type 27) X X X
Metal Grinding (Type 11) NN N
Metal Cutting (Type 41/1A) O O O
Concrete Surfacing OO O
Concrete/Masonry Cutting O O O
Sanding * OO O
Wire Brushing (Wheel) X X X
Wire Brushing (Cup) * OO O