Bosch GWX 13-125 - Product Information; Product Features; Technical Data

20 | English
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
Together with the hand guard (accessory), the power tool
can be used for brushing and sanding with elastic sanding
pads.
The power tool is suitable only for working without water.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Unlocking lever for protective guard
(2)
Direction of rotation arrow on housing
(3)
Lever
(4)
On/off switch
(5)
Speed preselection thumbwheel (GWX ... S/T)
(6)
Auxiliary handle (insulated gripping surface)
(7)
Protective guard for grinding
(8)
X-LOCK grinding disc/flap disc
A)
(9)
Protective guard for cutting
A)
(10)
X-LOCK cutting disc
A)
(11)
X-LOCK backing pad for fibre discs
A)
(12)
X-LOCK fibre disc
A)
(13)
X-LOCK clip for fibre discs
A)
(14)
Hand guard
A)
(15)
X-LOCK cup brush/disc brush
A)
(16)
X-LOCK holder
(17)
Handle (insulated gripping surface)
(18)
Extraction guard for cutting with a guide block
A)
(19)
Diamond cutting disc
A)
(20)
X-LOCK diamond core cutter
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Angle grinder GWX 13-125 GWX 13-125 S GWX 17-125
Article number
3 601 GB5 0.. 3 601 GB6 0.. 3 601 GC3 0..
Rated power input W 1300 1300 1700
Power output W 700 700 1010
Rated speed min
-1
11,500 11,500 11,500
Speed adjustment range min
-1
– 2800–11500 –
Max. grinding disc diameter mm 125 125 125
Speed preselection – ● –
Restart protection ● ● ●
Constant electronic control ● ● ●
Starting current limitation ● ● ●
Kickback stop ● ● ●
Weight according to EPTA-Procedure 01:2014
– with additional low-vibration aux-
iliary handle
kg 2.4 2.4 2.5
– with standard auxiliary handle kg 2.3 2.3 2.4
Protection class
/ II / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Angle grinder GWX 17-125 S GWX 17-125 T GWX 17-150 GWX 19-125 S
Article number
3 601 GC5 0.. 3 601 GC4 0.. 3 601 GC6 0.. 3 601 GC8 0..
Rated power input W 1700 1700 1700 1900
Power output W 1010 1010 1010 1220
Rated speed min
-1
11,500 9300 9300 11,500
Speed adjustment range min
-1
2800–11,500 2800–9300 – 2800–11,500
Max. grinding disc diameter mm 125 125 150 125
Speed preselection ● ● – ●
Restart protection ● ● ● ●
Constant electronic control ● ● ● ●
1 609 92A 4FB | (15.01.2019) Bosch Power Tools