To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 1300 and is the answer not in the manual?
General| Power | 550 W |
|---|---|
| Power Source | Corded Electric |
| Voltage | 230 V |
| Impact Rate | 0 - 44800 bpm |
| Drilling capacity in concrete | 13 mm |
| Drilling capacity in steel | 10 mm |
| Drilling capacity in wood | 25 mm |
| Weight | 1.8 kg |
| Chuck Capacity | 1.5 - 13 mm |
Read all safety warnings, instructions, illustrations and specifications for safe operation.
Maintain a clean, well-lit work area. Avoid hazardous atmospheres and keep bystanders away.
Use correct plugs and outlets. Avoid contact with earthed surfaces and wet conditions.
Stay alert, use PPE, prevent unintended starts, dress appropriately, and maintain balance.
Wear ear protection during impact drilling. Use auxiliary handle. Hold by insulated surfaces to avoid shock.
Use correct speeds, start slowly, apply pressure in line with the bit to prevent bending.
Switch off if blocked, hold securely, secure workpiece, use utility detectors, wait for tool to stop.
For impact drilling in masonry and drilling in wood, metal, ceramic, plastic. Suitable for screwdriving.
Lists numbered components and parts of the power tool, referencing diagrams for identification.
Detailed specifications including article number, power input/output, speed, torque, dimensions, and weight.
Noise emission and vibration values determined per EN 62841-2-1. Recommends hearing protection.
Guide for attaching the auxiliary handle and setting the depth stop for drilling.
Procedures for changing the keyed chuck and using screwdriving bits with a holder.
Safety precautions for handling dust from materials like lead, wood, minerals, and metal.
Instructions for starting, setting rotational direction, operating mode, and adjusting speed/impact rate.
Tips for safe operation, tool cooling, drilling tiles, and using metal drill bits effectively.
Guidelines for cleaning the tool, maintaining ventilation, and scheduling professional servicing.
Contact details for customer support, maintenance, repairs, and spare parts ordering.
