To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 10.8-2-LI Professional and is the answer not in the manual?
General| Voltage | 10.8 V |
|---|---|
| Battery type | Li-Ion |
| Max torque (hard) | 30 Nm |
| No-load speed (1st gear) | 0 - 400 rpm |
| Drill diameter in steel, max. | 10 mm |
| Drill diameter in masonry, max. | 10 mm |
| Screw diameter, max. | 7 mm |
| Torque settings | 20+1 |
| Chuck capacity | 10 mm |
| Max. impact rate | 19500 bpm |
| Battery capacity | 1.5 Ah |
Ensures safe operation by maintaining a clean area, following electrical guidelines, and prioritizing personal safety.
Covers preventing unintentional starts, proper dress, tool care, and safe battery usage.
Addresses hearing protection, tool control, kickback, hidden wiring, and utility line safety.
Details battery safety, material hazards, workplace safety, and pre-operation checks.
Provides explanations for various symbols used in the manual for better understanding.
Lists technical data, intended use, and delivery scope of the machine.
Covers battery/tool handling, settings like torque/mode, and switching the tool on/off.
Provides guidance on keeping the machine clean and information on after-sales service.
Addresses requirements for transporting lithium-ion batteries, especially concerning dangerous goods legislation.
Guidelines for environmentally friendly recycling of the machine, batteries, and packaging.
