To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GSB 18V-45 and is the answer not in the manual?
General safety advice for operating power tools, including warnings and instructions.
Guidelines for a safe work environment and avoiding electrical hazards.
Advice on staying alert, using PPE, and preventing accidental starts.
Steps for handling batteries, charging, and understanding charge status.
How to change rotation, select modes, and adjust speed using controls.
General safety advice for operating power tools, including warnings and instructions.
Guidelines for a safe work environment and avoiding electrical hazards.
Advice on staying alert, using PPE, and preventing accidental starts.
Steps for handling batteries, charging, and understanding charge status.
How to change rotation, select modes, and adjust speed using controls.
General| Voltage | 18 V |
|---|---|
| Max Torque | 45 Nm |
| Torque (hard) | 45 Nm |
| Chuck capacity, min./max. | 1.5 - 13 mm |
| Torque settings | 20+1 |
| Drilling diameter in wood, max. | 35 mm |
| Max. drilling diameter in wood | 35 mm |
| Drilling diameter in steel, max. | 10 mm |
| Max. drilling diameter in steel | 10 mm |
| Drilling diameter in masonry, max. | 10 mm |
| Max. drilling diameter in masonry | 10 mm |
| Screw diameter, max. | 10 mm |
| Chuck Type | Keyless chuck |
| No-load Speed (2nd Gear) | 0 - 1900 rpm |
| No-load speed | 0 - 1900 rpm |
