Do you have a question about the Bosch HDS Series and is the answer not in the manual?
Instructions for areas above 2,000 feet.
Specific requirements for installations in Massachusetts.
Lists items included in the LP conversion kit.
Lists necessary tools for performing the conversion.
Crucial safety step to disconnect power and gas before starting.
Adjusts the gas pressure regulator for LP gas use.
Swaps natural gas orifices for LP gas orifices on the cooktop.
Adjusts cooktop burner control valves for LP gas.
Modifies the broil burner orifice for LP gas.
Modifies the oven burner orifice for LP gas.
Verifies all connections are leak-free using detection fluid.
Checks proper ignition of cooktop, broil, and bake burners.
Inspects and adjusts burner flames for correct blue color and carryover.
Fine-tunes the broil burner's air shutter for optimal flame.
Diagram showing original natural gas orifice locations.