Bosch HMB30155UC - Basic Settings; Favorites; Panel Lock

en-us Basic Operation
16
9.3 Panel lock
The panel lock feature is very useful when cleaning the
control panel. The lock will prevent accidental
programming when wiping the control panel clean.
Requirement:The appliance is turned off.
1. Activating the panel lock:
‒ Touch and hold stop/clear for more than 3seconds.
‒ lights up in the display, 2beeps sounds. The time
of day is not displayed.
2. Deactivating the panel lock:
‒ Touch and hold stop/clear for more than 3seconds.
‒ turns off.
9.4 Favorites
You can store up to 3settings for microwave cooking for
quick access.
Storing favorites
1. Touch favorite.
a and light up.
a The first two bars of the status bar are blinking.
2. Touch cook time.
3. Enter the desired cook time with the number keys.
4. Touch power level.
5. Enter the desired power level with the number keys.
6. Touch favorite.
a The favorite setting is saved.
7. To enter a second and third favorite setting, start by
touching favorite 2 or 3times, then carry out the steps
as described.
Using favorites
1. Touch favorite.
a and light up.
a The first two bars of the status bar are blinking.
2. Touch favorite again to call up the second or third
favorite setting.
3. Touch start.
a The status bar shows the stored power level.
a The stored cooking time starts to count down.
a When the cooking time has run out the appliance is
beeping.
4. Touch stop/clear
a The appliance turns off and the time of day is displayed.
9.5 Basic settings
You can configure the basic settings for your appliance to
meet your needs.
Basic settings overview
Setting Display/Options
Time of day
Setting Display/Options
Enter time of day with the number
keys
Key press sounds ⁠ ⁠:
¡ - On
¡ - Off
Signal sound level ⁠ ⁠:
¡ - lowest
¡
¡
¡
¡ - highest
Clock format Select 12 or 24 hour format
¡
¡
Demo mode ⁠ ⁠:
¡ - On
¡ - Off
Child safety door lock ⁠ ⁠:
¡ - On
¡ - Off
Note:If you deactivate the door
lock for you own living situation,
be sure to reactivate the door
lock for new owners of the
appliance.
Changing the basic settings
1. Touch clock/settings once to change the time of day.
→ "Setting the time of day", Page13
2. To change all other settings, touch clock/settings
twice.
a and is displayed.
3. Touch start (+30secs) to enter the basic settings
menu.
a ⁠ ⁠: is blinking.
4. Touch clock/settings repeatedly, until the desired
basic setting is displayed.
5. Touch start (+30secs).
a The current value of the selected basic setting is
blinking.
6. Touch clock/settings repeatedly until the desired
settings value is displayed.
7. Touch start (+30secs) to confirm and exit the settings
menu.
8. To change another basic setting start the procedure
from the beginning.