5
Step 3: Electrical Installation
The Bosch microwave oven is equipped with a grounded cord. The wall receptacle must be installed
and grounded in accordance with the national electrical code. Also, electrical connections and
grounding must comply with all applicable local codes.
The electrical requirements for a separate circuit serving only this microwave oven are: 120V, 60Hz,
15Amp.
Step 4: Installing the Microwave Oven
1. Disconnect the microwave oven from the outlet
before proceeding with installation.
2. Remove any loose items (turntable, support, etc.)
from the microwave oven.
3. Fasten the bottom bracket to the bottom duct
by using two 1/2" screws.
4. Install bottom duct with four 1/2" screws to
bottom of microwave.
Step A
Front
Rear
1/2" Screws (2)
1/2" Screws (2)
1/2" Screws (2)
FRONT VIEW OF
MICROWAVE
To Next Page
Loading...
