9
Install Appliance
Prepare the Appliance
Prepare the appliance according to figures 1-7.
Using pliers, rotate as you pull out to remove the plastic
microwave feet.
Attach base supports (E) with Torx pan head bolts (D).
Remove and save this T-20 Torx screw for air duct
installation.
Add tape (C) to air duct (F) and attach to Microwave,
being careful to align screw hole from Fig. 3.
Secure top air duct with T-20 Torx screw removed in
Fig. 3.
To Next Page
Loading...
