en Basic operation
16
2. To loosen the ice cubes, twist the
ice cube tray slightly or hold briefly
under flowing water.
Basic operation
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Switching on the appliance
1. Switch on the appliance at the
main switch. →"Appliance", Fig.
1 /
, Page14
a The appliance begins to cool.
a The temperature display flashes
until the appliance has reached the
set temperature.
2. "Set the required temperature."
→Page16
Operating tips
¡ Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put in any food in the appli-
ance until the temperature is
reached.
Switching off the appliance
▶
Switch off the appliance at the
main switch. →"Appliance", Fig.
1 /
, Page14
a The appliance stops cooling.
Setting the temperature
After you have switched on the appli-
ance, you can set the temperature.
Setting the refrigerator
compartment temperature
▶
Press repeatedly until the tem-
perature display shows the re-
quired temperature.
The recommended temperature in
the refrigerator compartment is
4°C.
→""OK" sticker", Page17
Setting the freezer compartment
temperature
▶
In order to set the freezer compart-
ment temperature, "change the re-
frigerator compartment temperat-
ure" →Page16.
The refrigerator compartment tem-
perature influences freezer com-
partment temperature. Refrigerator
compartment temperatures that
are set to warm generate warmer
freezer compartment temperatures.
Additional functions
Additional functions
Additional functions
Find out which additional functions
which can be used for your appli-
ance.
Super freezing
Super freezing cools the freezer com-
partment as cold as possible. This
freezes food quickly right through to
the centre.
Switch on Super freezing four to
sixhours before placing food weigh-
ing 2kg or more into the freezer
compartment.
To Next Page
Loading...
