Bosch KUR15ADF0 - Cleaning the Condensation Channel and Drainage Hole; Cleaning the Ventilation Grille

en Cleaning and servicing
16
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶ Do not use hard scouring pads or
cleaning sponges.
▶ Do not use harsh or abrasive de-
tergents.
▶ Do not use cleaning products with
a high alcohol content.
▶ Do not use stainless-steel cleaning
agents on the outside of the appli-
ance.
If liquid gets into the drainage hole,
the evaporation pan may overflow.
▶ The rinsing water must not get into
the drainage hole.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
▶ Never clean fittings and accessory
in the dishwasher.
1. Prepare the appliance for cleaning.
→Page15
2. Clean the appliance, the fittings,
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
3. Dry thoroughly with a soft, dry
cloth.
4. Insert the fittings.
5. Electrically connect the appliance.
→Page10
6. Putting the food into the appliance.
10.4 Cleaning the condensa-
tion channel and drain-
age hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
1. Remove the pull-out container.
→Page17
2. Carefully clean the condensation
channel and the drainage hole,
e.g. using a cotton bud.
10.5 Cleaning the ventilation
grille
1. Remove the exterior ventilation
grille for cleaning.
‒ To do this, depress the clips in
the ventilation openings and
simultaneously remove the ex-
terior ventilation grille forwards.
2. Clean the exterior ventilation grille
with lukewarm soapy water and a
dish cloth.
3. Let the exterior ventilation grille dry
completely and insert it.