Bosch LP1-UC10E-1 User Manual

Sound Projector
en
Instructions for use
LP1-UC10E-1
LP1-UC20E-1
F.01U.087.495 © Bosch Security Systems 2008
Data subject to change without notice.
TECHNICAL PERFORMANCE DATA ACC.TO IEC 60268-5
LP1-UC10E-1 LP1-UC20E-1
Electrical
Maximum power 15 W 30 W
Rated power 10 / 5 / 2.5 / 1.25 W 20 / 10 / 5 / 2.5 W
Sound pressure level
at 10 W / 1W (1 kHz, 1 m) 96 dB / 86 dB (SPL)
at 20 W / 1W (1 kHz, 1 m) 100 dB / 87 dB (SPL)
Opening angle
at 1 kHz / 4 kHz (-6dB) 220 / 65 degrees 220 / 65 degrees
Effective freq.range (-10 dB) 75 Hz to 20 kHz 75 Hz to 20 kHz
Rated voltage 100 V 100 V
Rated impedance 1000 Ohm 500 Ohm
Connector 3 pole screw terminal 3 pole screw terminal
Mechanical
Dimensions (D x L) 185 x 300 mm
(7.3 x 11.8 in)
185 x 300 mm
(7.3 x 11.8 in)
Weight 3 kg (6.6 lb)3 kg (6.6 lb)
Color white (RAL 9010) white (RAL 9010)
Material ABS ABS
Environmental
Operating temperature -25 °C to + 55 °C
(-13 °F to +131 °F)
-25 °C to + 55 °C
(-13 °F to +131 °F)
Storage temperature -40 °C to + 70 °C
(-40 °F to +158 °F)
-40 °C to + 70 °C
(-40 °F to +158 °F)
Relative humidity < 95% < 95%
Dimensions in mm / (inch) A: Cut-out
341
Ø185
Ø144
77
41
Ø185
34
Ø144
303
Ø185
11
14
23
109
120°
27
138
40
6
(13.43)
(7.28)
(5.67)
(1.61)
(3.03)
300
(11.81)
(7.28)
(7.28)
(5.67)
(1.34)
(11.93)
A
(0.43)
(0.90)
(0.55)
(0.24)
(4.29)
(5.43)
(1.06)
(1.57)
10W
(20W)
5W
(10W)
2.5W
(5W)
0
1.25W
(2.5W)
Circuit diagram LP1-UC10E-1 (LP1-UC20E-1)
Frequency response
LP1-UC-10E-1 LP1-UC-20E-1
Polar diagram (measured with pink noise)

Bosch LP1-UC10E-1 Specifications

General

Brand	Bosch
Model	LP1-UC10E-1
Maximum Power	15 W
Rated Power	10 W
Rated Voltage	100 V
Color	White (RAL 9010)
Connector	Terminal block
Material	ABS
Operating Temperature	-25 ºC to +55 ºC
Storage Temperature	-40 °C to +70 °C
Impedance	8 Ω
Rated Impedance	8 ohm

Summary

Technical Performance Specifications

Environmental Conditions

Details operating temperature, storage temperature, and relative humidity.

Mechanical Attributes

Outlines physical dimensions, weight, color, and material composition.

Electrical Characteristics

Lists power ratings, sound pressure levels, frequency range, voltage, and connector.

Frequency Response Analysis

Presents graphical data on the device's audio frequency performance.

Sound Dispersion Patterns

Illustrates the sound output coverage at various angles and frequencies.

Installation and Usage Guide

Mounting Bracket Preparation

Preparing the mounting bracket and connecting initial wires.

Securing the Mounting Bracket

Attaching the primary mounting bracket to the surface.

Safety Cable Attachment

Connecting the essential safety cable for enhanced security.

Wire Connections and Tap Selection

Details on connecting speaker wires and selecting power taps.

Speaker Unit Connection

Finalizing the connection of the main speaker unit.

Adjusting Speaker Orientation

Guides on positioning and setting the speaker's final angle.