■ Add liquids and solid (fairly small) ingre-
dients through the feed tube in the lid.
■ Switch on appliance again.
Blender attachment made of
glass
Note: The blender jug consists of extremely
temperature-resistant borosilicate glass
and allows you to prepare even boiling hot
ingredients without the glass cracking.
The blender is suitable for
– blending and frothing liquids,
– cutting and chopping raw and frozen
fruit, vegetables, nuts and chocolate,
– puréeing soups, cooked fruit and
vegetables,
– preparing mayonnaise and sauces.
The appliance is suitable for preparing the
following quantities:
Solid food 400 g
Liquids max. 1.5 l
W Hot or frothing liquids max. 0.75 l
X Fig. C
■ Insert blender blade into the blade
holder and lock by turning it to the left.
■ Attach blender jug to the drive on the
motor block.
■ Attach blender jug by turning it all the
way clockwise. The coloured mark on
the blade holder must be visible in the
cutout on the motor unit!
■ Add ingredients.
■ Attach lid and press firmly.
The cover can be attached in
2 positions.
– with outlet opening forwards for pouring
out the blended ingredients.
– with outlet opening backwards,
container closed.
■ Insert measuring cup into feed tube and
turn it anti-clockwise.
■ Insert the mains plug.
■ Rotate the switch to the required setting.
■ Grip the edge of the lid while operating
the blender. Do not reach over the feed
tube or spout!
Add more ingredients:
■ Set the rotary switch to f. Wait until
the drive comes to a standstill.
Either
■ Remove lid.
■ Add more ingredients.
or
■ Take out measuring cup.
■ Add liquids and solid (fairly small)
ingredients through the feed tube in
the lid.
■ Switch on appliance again.
Working with the smoothie insert
With this insert it is particularly easy to
make smoothies made of fresh fruits, milk,
soya milk, yoghurt and juices.
X Fig. D
■ Prepare the blender and attach to the
motor block as described above.
■ Insert the smoothie insert into the
blender jug.
■ Attach lid with outlet opening forwards
(for pouring out the smoothie later).
■ Put ingredients through the feed tube
into the blender jug; chop up fruit
beforehand if required.
Warning!
Do not put large, hard ingredients in the
blender jug, e. g. stones from avocados or
plums.
■ Insert measuring cup into feed tube and
turn it anti-clockwise.
■ Insert the mains plug.
■ Switch on appliance at a setting with a
high operating speed.
Note: Appliances which feature a smoothie
programme button can provide the optimum
speed and switch-on time for making
smoothies.
After using the appliance
■ Set the rotary switch to f. Wait until
the drive comes to a standstill.
■ Remove mains plug.
■ Remove the blender by rotating it in an
anti-clockwise direction.
To Next Page
Loading...
